Swap Hyperliquid (HYPE) to Polygon (POL)
Exchange Hyperliquid for Polygon without an account. Enter an amount, give a Polygon address, send the exact HYPE amount shown — your POL follows once the deposit confirms.
HYPE to POL rate
Market rate, updated 2026-10-22 14:48 UTC1 HYPE = 861.415 POL
1 POL = 0.00116088 HYPE
Hyperliquid is trading at $78.17 and Polygon at $0.090746. Your quote applies a 0.5% swap fee and a network-fee charge for thePolygon payout to this rate, and shows the exact POL you receive before you send.
| Send | Receive | ≈ USD |
|---|---|---|
| 0.1279 HYPE | 110.2 POL | $10 |
| 0.6396 HYPE | 550.99 POL | $50 |
| 1.279 HYPE | 1102 POL | $100 |
| 6.396 HYPE | 5509.9 POL | $500 |
| 12.79 HYPE | 11020 POL | $1,000 |
| 63.96 HYPE | 55099 POL | $5,000 |
HYPE to POL swap details
- Minimum swap
- $100 (≈ 1.27 HYPE)
- Maximum swap
- No limit set by the site
- Swap fee
- 0.5% of the amount
- Payout network fee
- A charge for the Polygon payout transaction, shown in the quote
- Quote valid for
- 60 minutes to accept, then refreshed
- HYPE deposit confirmation
- Verified on the Hyperliquid network before the payout is released
- POL payout
- Sent to your address once the deposit is confirmed
- Account
- None required
Why exchange Hyperliquid (HYPE) to Polygon (POL)?
Exchange HYPE for POL and the Polygon goes to an address you control. No account to open, no balance left with us.
The HYPE/POL exchange rate, the network fee and the swap fee are shown before you send a single HYPE. The POL amount quoted is the POL amount you get.
Nothing is asked of you beyond a Polygon address. Send the exact HYPE figure shown on your swap page, including every decimal place — a rounded amount needs manual review and takes longer.
Sending Hyperliquid
HYPE is the native asset of Hyperliquid, a layer-1 that runs the HyperCore trading engine and the HyperEVM smart-contract chain under one consensus. On HyperEVM, HYPE is the gas token — a native balance, not a contract token.
Hyperliquid blocks arrive about a second, so a deposit usually confirms in usually under a minute once a manual check is complete.
Your HYPE deposit is verified on the HyperEVM network before the swap proceeds — typically usually under a minute once a manual check is complete after you send.
Send native HYPE on HyperEVM (chain ID 999) only. HyperCore spot HYPE and WHYPE use the same-looking 0x address but are different balances; a transfer from either is not detected automatically and may need manual recovery.
Receiving Polygon
POL (formerly MATIC) is the native asset of Polygon PoS, an EVM-compatible network with low fees widely used for payments and DeFi.
Your Polygon goes to the address you give, and only that address. Accepted formats: 0x followed by 40 hexadecimal characters.
The payout is sent once your deposit is confirmed. Polygon blocks arrive about 2 seconds, so it is usually spendable within minutes of being sent.
How to swap HYPE to POL
Full details →- 01Get a HYPE to POL quote
Enter how much Hyperliquid you want to convert. You see the live HYPE to POL rate, both fees and the exact Polygon you will receive before you commit.
- 02Send your Hyperliquid
You get a Hyperliquid (HYPE) deposit address and an exact amount. Send it from any Hyperliquid wallet — scanning the QR code fills in both where your wallet supports it.
- 03Receive Polygon (POL)
Once the HYPE deposit confirms on-chain, Polygon is sent to the Polygon address you gave. Track it on the swap’s status page, no login needed.
Hyperliquid (HYPE) to Polygon (POL) FAQ
- What does the HYPE to POL rate mean?
- It is how much Polygon (POL) you receive for each Hyperliquid (HYPE) you send, taken from live market prices at the moment you ask for a quote. The rate moves with the market, so you have 60 minutes to accept a quote and create the swap; the widget refreshes it automatically if you take longer. Funding the swap once it exists has its own separate deadline, shown on your swap page.
- How do I convert HYPE to POL?
- Enter the amount of HYPE in the widget, choose POL as what you receive, and give a Polygon address. You are shown a deposit address and an exact HYPE amount; send that amount and the POL is paid to your address once the deposit confirms. No account is needed at any step.
- What are the fees to exchange HYPE for POL?
- Two, both shown in the quote before you send: a swap fee of 0.5% of the amount, and a network-fee charge for the Polygon payout transaction. There is nothing added afterwards — the POL amount in the quote is the POL amount that arrives.
- What is the minimum HYPE/POL exchange amount?
- $100 worth, shown in the widget as an amount of HYPE at the current rate. There is no maximum imposed by the site beyond available Polygon liquidity, and no verification at any size.
- Do I need an ID to swap HYPE to POL?
- No. There is no KYC, no account and no email required. A swap is identified by its link, which shows its status without logging in. Creating an account is optional and only keeps your swap history in one place.
- How long do HYPE to POL swaps take?
- Hyperliquid deposits usually confirm in usually under a minute once a manual check is complete, after which the deposit is verified on-chain. Swap times vary by asset and by how quickly its network confirms. Your swap status page shows the current stage throughout the process.
- Which Polygon address should I give?
- Any address in a format Polygon accepts: 0x followed by 40 hexadecimal characters.
- What happens if my HYPE deposit is late or the swap expires?
- There are two separate deadlines. The quote itself is held for 60 minutes — that is how long you have to accept the price and create the swap. Once the swap exists you get a separate funding window, shown on your swap page, to send the HYPE. If your deposit arrives after that window closes, the status page shows Expired and the swap moves to Review required; it is then completed at the current rate or refunded to your refund address. Nothing is lost by being late — a late deposit just needs review before it is processed.
- Can I swap POL back to HYPE?
- Yes — every pair works in both directions. The POL to HYPE page is linked below.
Related guides
All guides →- HYPE on HyperCore vs HyperEVM: which network should you use?
Hyperliquid gives one 0x address two separate HYPE balances. How to pick the right side at a withdrawal screen, what each is for, and what is and is not recoverable.
- What happens if you send crypto on the wrong network?
Sometimes the funds are trivially recoverable, sometimes they are gone, and the difference comes down to who holds the private key. How to tell which situation you are in.
- How on-chain deposit confirmations actually work
What a confirmation is, why "6 confirmations" means nothing on Ethereum or Solana, and why a transaction being visible is not the same as it being safe to act on.
Related swaps
All pairs →Going the other way? Swap Polygon to Hyperliquid.
See every route into Polygon or everything you can swap Hyperliquid for.