Swap Polygon (POL) to Hyperliquid (HYPE)
Exchange Polygon for Hyperliquid without an account. Enter an amount, give a Hyperliquid address, send the exact POL amount shown — your HYPE follows once the deposit confirms.
POL to HYPE rate
Market rate, updated 2026-10-22 14:48 UTC1 POL = 0.00116088 HYPE
1 HYPE = 861.415 POL
Polygon is trading at $0.090746 and Hyperliquid at $78.17. Your quote applies a 0.5% swap fee and a network-fee charge for theHyperliquid payout to this rate, and shows the exact HYPE you receive before you send.
| Send | Receive | ≈ USD |
|---|---|---|
| 110.2 POL | 0.12793 HYPE | $10 |
| 551 POL | 0.63963 HYPE | $50 |
| 1102 POL | 1.2793 HYPE | $100 |
| 5510 POL | 6.3963 HYPE | $500 |
| 11020 POL | 12.793 HYPE | $1,000 |
| 55100 POL | 63.963 HYPE | $5,000 |
POL to HYPE swap details
- Minimum swap
- $100 (≈ 1100 POL)
- Maximum swap
- No limit set by the site
- Swap fee
- 0.5% of the amount
- Payout network fee
- A charge for the Hyperliquid payout transaction, shown in the quote
- Quote valid for
- 60 minutes to accept, then refreshed
- POL deposit confirmation
- Verified on the Polygon network before the payout is released
- HYPE payout
- Sent to your address once the deposit is confirmed
- Account
- None required
Why exchange Polygon (POL) to Hyperliquid (HYPE)?
Exchange POL for HYPE and the Hyperliquid goes to an address you control. No account to open, no balance left with us.
The POL/HYPE exchange rate, the network fee and the swap fee are shown before you send a single POL. The HYPE amount quoted is the HYPE amount you get.
Nothing is asked of you beyond a Hyperliquid address. Send the exact POL figure shown on your swap page, including every decimal place — a rounded amount needs manual review and takes longer.
Sending Polygon
POL (formerly MATIC) is the native asset of Polygon PoS, an EVM-compatible network with low fees widely used for payments and DeFi.
Polygon blocks arrive about 2 seconds, so a deposit usually confirms in a few minutes.
Your POL deposit is verified on the Polygon network before the swap proceeds — typically a few minutes after you send.
Send native POL on the Polygon PoS network, not POL/MATIC as an ERC-20 token on Ethereum.
Receiving Hyperliquid
HYPE is the native asset of Hyperliquid, a layer-1 that runs the HyperCore trading engine and the HyperEVM smart-contract chain under one consensus. On HyperEVM, HYPE is the gas token — a native balance, not a contract token.
Your Hyperliquid goes to the address you give, and only that address. Accepted formats: 0x followed by 40 hexadecimal characters.
Give an address you control on HyperEVM. If it belongs to an exchange, first confirm the exchange accepts HYPE deposits on HyperEVM rather than only on HyperCore — HYPE paid to the wrong environment cannot be credited by them.
The payout is sent once your deposit is confirmed. Hyperliquid blocks arrive about a second, so it is usually spendable within minutes of being sent.
How to swap POL to HYPE
Full details →- 01Get a POL to HYPE quote
Enter how much Polygon you want to convert. You see the live POL to HYPE rate, both fees and the exact Hyperliquid you will receive before you commit.
- 02Send your Polygon
You get a Polygon (POL) deposit address and an exact amount. Send it from any Polygon wallet — scanning the QR code fills in both where your wallet supports it.
- 03Receive Hyperliquid (HYPE)
Once the POL deposit confirms on-chain, Hyperliquid is sent to the Hyperliquid address you gave. Track it on the swap’s status page, no login needed.
Polygon (POL) to Hyperliquid (HYPE) FAQ
- What does the POL to HYPE rate mean?
- It is how much Hyperliquid (HYPE) you receive for each Polygon (POL) you send, taken from live market prices at the moment you ask for a quote. The rate moves with the market, so you have 60 minutes to accept a quote and create the swap; the widget refreshes it automatically if you take longer. Funding the swap once it exists has its own separate deadline, shown on your swap page.
- How do I convert POL to HYPE?
- Enter the amount of POL in the widget, choose HYPE as what you receive, and give a Hyperliquid address. You are shown a deposit address and an exact POL amount; send that amount and the HYPE is paid to your address once the deposit confirms. No account is needed at any step.
- What are the fees to exchange POL for HYPE?
- Two, both shown in the quote before you send: a swap fee of 0.5% of the amount, and a network-fee charge for the Hyperliquid payout transaction. There is nothing added afterwards — the HYPE amount in the quote is the HYPE amount that arrives.
- What is the minimum POL/HYPE exchange amount?
- $100 worth, shown in the widget as an amount of POL at the current rate. There is no maximum imposed by the site beyond available Hyperliquid liquidity, and no verification at any size.
- Do I need an ID to swap POL to HYPE?
- No. There is no KYC, no account and no email required. A swap is identified by its link, which shows its status without logging in. Creating an account is optional and only keeps your swap history in one place.
- How long do POL to HYPE swaps take?
- Polygon deposits usually confirm in a few minutes, after which the deposit is verified on-chain. Swap times vary by asset and by how quickly its network confirms. Your swap status page shows the current stage throughout the process.
- Which Hyperliquid address should I give?
- Any address in a format Hyperliquid accepts: 0x followed by 40 hexadecimal characters. Give an address you control on HyperEVM. If it belongs to an exchange, first confirm the exchange accepts HYPE deposits on HyperEVM rather than only on HyperCore — HYPE paid to the wrong environment cannot be credited by them.
- What happens if my POL deposit is late or the swap expires?
- There are two separate deadlines. The quote itself is held for 60 minutes — that is how long you have to accept the price and create the swap. Once the swap exists you get a separate funding window, shown on your swap page, to send the POL. If your deposit arrives after that window closes, the status page shows Expired and the swap moves to Review required; it is then completed at the current rate or refunded to your refund address. Nothing is lost by being late — a late deposit just needs review before it is processed.
- Can I swap HYPE back to POL?
- Yes — every pair works in both directions. The HYPE to POL page is linked below.
Related guides
All guides →- How on-chain deposit confirmations actually work
What a confirmation is, why "6 confirmations" means nothing on Ethereum or Solana, and why a transaction being visible is not the same as it being safe to act on.
Related swaps
All pairs →Going the other way? Swap Hyperliquid to Polygon.
See every route into Hyperliquid or everything you can swap Polygon for.