Swap Tether (USDT) to Hyperliquid (HYPE)
Exchange Tether for Hyperliquid without an account. Enter an amount, give a Hyperliquid address, send the exact USDT amount shown — your HYPE follows once the deposit confirms.
USDT to HYPE rate
Market rate, updated 2026-10-22 14:48 UTC1 USDT = 0.0127831 HYPE
1 HYPE = 78.2284 USDT
Tether is trading at $0.999254 and Hyperliquid at $78.17. Your quote applies a 0.5% swap fee and a network-fee charge for theHyperliquid payout to this rate, and shows the exact HYPE you receive before you send.
| Send | Receive | ≈ USD |
|---|---|---|
| 10.01 USDT | 0.12793 HYPE | $10 |
| 50.04 USDT | 0.63963 HYPE | $50 |
| 100.1 USDT | 1.2793 HYPE | $100 |
| 500.4 USDT | 6.3963 HYPE | $500 |
| 1001 USDT | 12.793 HYPE | $1,000 |
| 5004 USDT | 63.963 HYPE | $5,000 |
USDT to HYPE swap details
- Minimum swap
- $100 (≈ 100 USDT)
- Maximum swap
- No limit set by the site
- Swap fee
- 0.5% of the amount
- Payout network fee
- A charge for the Hyperliquid payout transaction, shown in the quote
- Quote valid for
- 60 minutes to accept, then refreshed
- USDT deposit confirmation
- Verified on the Tether network before the payout is released
- HYPE payout
- Sent to your address once the deposit is confirmed
- Account
- None required
Why exchange Tether (USDT) to Hyperliquid (HYPE)?
Exchange USDT for HYPE and the Hyperliquid goes to an address you control. No account to open, no balance left with us.
The USDT/HYPE exchange rate, the network fee and the swap fee are shown before you send a single USDT. The HYPE amount quoted is the HYPE amount you get.
Nothing is asked of you beyond a Hyperliquid address. Send the exact USDT figure shown on your swap page, including every decimal place — a rounded amount needs manual review and takes longer.
Sending Tether
Tether (USDT) is the largest US-dollar stablecoin, issued on several networks; a USDT token on one network is not the same token as on another.
USDT can be sent on Ethereum (ERC-20), Tron (TRC-20), BNB Smart Chain (BEP-20), Solana and Polygon. Choose the network in the widget first: the deposit address belongs to that network and USDT sent on any other network cannot be recovered.
Your USDT deposit is verified on the Ethereum (ERC-20) network before the swap proceeds — typically a few minutes on Ethereum, well under a minute on Tron, BNB Smart Chain or Solana after you send.
Pick the network in the widget before sending and use the matching address — USDT sent on the wrong network cannot be recovered by us.
Receiving Hyperliquid
HYPE is the native asset of Hyperliquid, a layer-1 that runs the HyperCore trading engine and the HyperEVM smart-contract chain under one consensus. On HyperEVM, HYPE is the gas token — a native balance, not a contract token.
Your Hyperliquid goes to the address you give, and only that address. Accepted formats: 0x followed by 40 hexadecimal characters.
Give an address you control on HyperEVM. If it belongs to an exchange, first confirm the exchange accepts HYPE deposits on HyperEVM rather than only on HyperCore — HYPE paid to the wrong environment cannot be credited by them.
The payout is sent once your deposit is confirmed. Hyperliquid blocks arrive about a second, so it is usually spendable within minutes of being sent.
How to swap USDT to HYPE
Full details →- 01Get a USDT to HYPE quote
Enter how much Tether you want to convert. You see the live USDT to HYPE rate, both fees and the exact Hyperliquid you will receive before you commit.
- 02Send your Tether
You get a Tether (USDT) deposit address and an exact amount. Send it from any Tether wallet — scanning the QR code fills in both where your wallet supports it.
- 03Receive Hyperliquid (HYPE)
Once the USDT deposit confirms on-chain, Hyperliquid is sent to the Hyperliquid address you gave. Track it on the swap’s status page, no login needed.
Tether (USDT) to Hyperliquid (HYPE) FAQ
- What does the USDT to HYPE rate mean?
- It is how much Hyperliquid (HYPE) you receive for each Tether (USDT) you send, taken from live market prices at the moment you ask for a quote. The rate moves with the market, so you have 60 minutes to accept a quote and create the swap; the widget refreshes it automatically if you take longer. Funding the swap once it exists has its own separate deadline, shown on your swap page.
- How do I convert USDT to HYPE?
- Enter the amount of USDT in the widget, choose HYPE as what you receive, and give a Hyperliquid address. You are shown a deposit address and an exact USDT amount; send that amount and the HYPE is paid to your address once the deposit confirms. No account is needed at any step.
- What are the fees to exchange USDT for HYPE?
- Two, both shown in the quote before you send: a swap fee of 0.5% of the amount, and a network-fee charge for the Hyperliquid payout transaction. There is nothing added afterwards — the HYPE amount in the quote is the HYPE amount that arrives.
- What is the minimum USDT/HYPE exchange amount?
- $100 worth, shown in the widget as an amount of USDT at the current rate. There is no maximum imposed by the site beyond available Hyperliquid liquidity, and no verification at any size.
- Do I need an ID to swap USDT to HYPE?
- No. There is no KYC, no account and no email required. A swap is identified by its link, which shows its status without logging in. Creating an account is optional and only keeps your swap history in one place.
- How long do USDT to HYPE swaps take?
- Tether deposits usually confirm in a few minutes on Ethereum, well under a minute on Tron, BNB Smart Chain or Solana, after which the deposit is verified on-chain. Swap times vary by asset and by how quickly its network confirms. Your swap status page shows the current stage throughout the process.
- Which network can I send USDT on?
- Ethereum (ERC-20), Tron (TRC-20), BNB Smart Chain (BEP-20), Solana and Polygon. Select the network before you start; the deposit address is specific to it. Pick the network in the widget before sending and use the matching address — USDT sent on the wrong network cannot be recovered by us.
- What happens if my USDT deposit is late or the swap expires?
- There are two separate deadlines. The quote itself is held for 60 minutes — that is how long you have to accept the price and create the swap. Once the swap exists you get a separate funding window, shown on your swap page, to send the USDT. If your deposit arrives after that window closes, the status page shows Expired and the swap moves to Review required; it is then completed at the current rate or refunded to your refund address. Nothing is lost by being late — a late deposit just needs review before it is processed.
- Can I swap HYPE back to USDT?
- Yes — every pair works in both directions. The HYPE to USDT page is linked below.
Related guides
All guides →- How to Swap USDT to ZEC (Zcash) Using SwapToZec.com: Complete Step-by-Step Guide
Want to convert USDT to ZEC (Zcash) quickly and privately? This complete guide shows you how to swap USDT to ZEC using SwapToZec.com — the simple, privacy-focused platform built for exchanging cryptocurrencies into Zcash.
- Which USDT network should you use for a swap?
Tether issues USDT on many blockchains; SwapToZec accepts four. How to pick, and why an address never tells you which network it belongs to.
- What happens if you send crypto on the wrong network?
Sometimes the funds are trivially recoverable, sometimes they are gone, and the difference comes down to who holds the private key. How to tell which situation you are in.
- How on-chain deposit confirmations actually work
What a confirmation is, why "6 confirmations" means nothing on Ethereum or Solana, and why a transaction being visible is not the same as it being safe to act on.
Related swaps
All pairs →Going the other way? Swap Hyperliquid to Tether.
See every route into Hyperliquid or everything you can swap Tether for.