Swap Hyperliquid (HYPE) to Tether (USDT)
Exchange Hyperliquid for Tether without an account. Enter an amount, give a Tether address, send the exact HYPE amount shown — your USDT follows once the deposit confirms.
HYPE to USDT rate
Market rate, updated 2026-10-22 14:48 UTC1 HYPE = 78.2284 USDT
1 USDT = 0.0127831 HYPE
Hyperliquid is trading at $78.17 and Tether at $0.999254. Your quote applies a 0.5% swap fee and a network-fee charge for theTether payout to this rate, and shows the exact USDT you receive before you send.
| Send | Receive | ≈ USD |
|---|---|---|
| 0.1279 HYPE | 10.007 USDT | $10 |
| 0.6396 HYPE | 50.037 USDT | $50 |
| 1.279 HYPE | 100.07 USDT | $100 |
| 6.396 HYPE | 500.37 USDT | $500 |
| 12.79 HYPE | 1000.7 USDT | $1,000 |
| 63.96 HYPE | 5003.7 USDT | $5,000 |
HYPE to USDT swap details
- Minimum swap
- $100 (≈ 1.27 HYPE)
- Maximum swap
- No limit set by the site
- Swap fee
- 0.5% of the amount
- Payout network fee
- A charge for the Tether payout transaction, shown in the quote
- Quote valid for
- 60 minutes to accept, then refreshed
- HYPE deposit confirmation
- Verified on the Hyperliquid network before the payout is released
- USDT payout
- Sent to your address once the deposit is confirmed
- Account
- None required
Why exchange Hyperliquid (HYPE) to Tether (USDT)?
Exchange HYPE for USDT and the Tether goes to an address you control. No account to open, no balance left with us.
The HYPE/USDT exchange rate, the network fee and the swap fee are shown before you send a single HYPE. The USDT amount quoted is the USDT amount you get.
Nothing is asked of you beyond a Tether address. Send the exact HYPE figure shown on your swap page, including every decimal place — a rounded amount needs manual review and takes longer.
Sending Hyperliquid
HYPE is the native asset of Hyperliquid, a layer-1 that runs the HyperCore trading engine and the HyperEVM smart-contract chain under one consensus. On HyperEVM, HYPE is the gas token — a native balance, not a contract token.
Hyperliquid blocks arrive about a second, so a deposit usually confirms in usually under a minute once a manual check is complete.
Your HYPE deposit is verified on the HyperEVM network before the swap proceeds — typically usually under a minute once a manual check is complete after you send.
Send native HYPE on HyperEVM (chain ID 999) only. HyperCore spot HYPE and WHYPE use the same-looking 0x address but are different balances; a transfer from either is not detected automatically and may need manual recovery.
Receiving Tether
Tether (USDT) is the largest US-dollar stablecoin, issued on several networks; a USDT token on one network is not the same token as on another.
USDT can be paid out on Ethereum (ERC-20), Tron (TRC-20), BNB Smart Chain (BEP-20), Solana and Polygon. Pick the network you want in the widget and give an address on that network — an 0x… address on Ethereum or BNB Smart Chain, a T… address on Tron, a base58 address on Solana.
Choose the network you want the USDT on; the address you give must belong to that network.
The payout is sent once your deposit is confirmed. Tether blocks arrive that of the network it is on, so it is usually spendable within minutes of being sent.
How to swap HYPE to USDT
Full details →- 01Get a HYPE to USDT quote
Enter how much Hyperliquid you want to convert. You see the live HYPE to USDT rate, both fees and the exact Tether you will receive before you commit.
- 02Send your Hyperliquid
You get a Hyperliquid (HYPE) deposit address and an exact amount. Send it from any Hyperliquid wallet — scanning the QR code fills in both where your wallet supports it.
- 03Receive Tether (USDT)
Once the HYPE deposit confirms on-chain, Tether is sent to the Tether address you gave. Track it on the swap’s status page, no login needed.
Hyperliquid (HYPE) to Tether (USDT) FAQ
- What does the HYPE to USDT rate mean?
- It is how much Tether (USDT) you receive for each Hyperliquid (HYPE) you send, taken from live market prices at the moment you ask for a quote. The rate moves with the market, so you have 60 minutes to accept a quote and create the swap; the widget refreshes it automatically if you take longer. Funding the swap once it exists has its own separate deadline, shown on your swap page.
- How do I convert HYPE to USDT?
- Enter the amount of HYPE in the widget, choose USDT as what you receive, and give a Tether address. You are shown a deposit address and an exact HYPE amount; send that amount and the USDT is paid to your address once the deposit confirms. No account is needed at any step.
- What are the fees to exchange HYPE for USDT?
- Two, both shown in the quote before you send: a swap fee of 0.5% of the amount, and a network-fee charge for the Tether payout transaction. There is nothing added afterwards — the USDT amount in the quote is the USDT amount that arrives.
- What is the minimum HYPE/USDT exchange amount?
- $100 worth, shown in the widget as an amount of HYPE at the current rate. There is no maximum imposed by the site beyond available Tether liquidity, and no verification at any size.
- Do I need an ID to swap HYPE to USDT?
- No. There is no KYC, no account and no email required. A swap is identified by its link, which shows its status without logging in. Creating an account is optional and only keeps your swap history in one place.
- How long do HYPE to USDT swaps take?
- Hyperliquid deposits usually confirm in usually under a minute once a manual check is complete, after which the deposit is verified on-chain. Swap times vary by asset and by how quickly its network confirms. Your swap status page shows the current stage throughout the process.
- Which Tether address should I give?
- Any address in a format Tether accepts: an 0x… address on Ethereum or BNB Smart Chain, a T… address on Tron, a base58 address on Solana. Choose the network you want the USDT on; the address you give must belong to that network.
- What happens if my HYPE deposit is late or the swap expires?
- There are two separate deadlines. The quote itself is held for 60 minutes — that is how long you have to accept the price and create the swap. Once the swap exists you get a separate funding window, shown on your swap page, to send the HYPE. If your deposit arrives after that window closes, the status page shows Expired and the swap moves to Review required; it is then completed at the current rate or refunded to your refund address. Nothing is lost by being late — a late deposit just needs review before it is processed.
- Can I swap USDT back to HYPE?
- Yes — every pair works in both directions. The USDT to HYPE page is linked below.
Related guides
All guides →- HYPE on HyperCore vs HyperEVM: which network should you use?
Hyperliquid gives one 0x address two separate HYPE balances. How to pick the right side at a withdrawal screen, what each is for, and what is and is not recoverable.
- What happens if you send crypto on the wrong network?
Sometimes the funds are trivially recoverable, sometimes they are gone, and the difference comes down to who holds the private key. How to tell which situation you are in.
- How to Swap USDT to ZEC (Zcash) Using SwapToZec.com: Complete Step-by-Step Guide
Want to convert USDT to ZEC (Zcash) quickly and privately? This complete guide shows you how to swap USDT to ZEC using SwapToZec.com — the simple, privacy-focused platform built for exchanging cryptocurrencies into Zcash.
- How on-chain deposit confirmations actually work
What a confirmation is, why "6 confirmations" means nothing on Ethereum or Solana, and why a transaction being visible is not the same as it being safe to act on.
Related swaps
All pairs →Going the other way? Swap Tether to Hyperliquid.
See every route into Tether or everything you can swap Hyperliquid for.